Use the Edge Standard v1 LCD to set up DHCP for the WAN port
Series: Use the LCD
Next suggested step: Use the Edge Standard v1 LCD to set the static IP address for the WAN Port
You can use the LCD in the Edge Standard v1 to set DHCP for the WAN port.
Notes:
- Check that an Ethernet cable connects your network to the Edge port labeled Port 1 (WAN).
- The Edge is not paired with Genesys Cloud at the beginning of this procedure.
- Press the lower right button at Genesys Cloud Edge.
- Press the lower right button at Status.
- Press the upper left button at Settings.
- Press the lower right button at System.
- Press the upper left button at Network.
- Press the lower right button at Proxy.
- Press the upper left button at Port 1 (WAN).
- Press the upper left button at Set DHCPV4.
- Press the upper left button at Apply Changes?.
[NEXT] Was this article helpful?
Get user feedback about articles.